In industrial automation and drivetrain maintenance, the reliability of a hydraulic filtration system bears directly on the service life of the equipment it protects. The hydraulic filter element designated 0501328035, manufactured by the drivetrain supplier ZF Friedrichshafen AG, is a core component in keeping automatic transmissions and related hydraulic circuits operating efficiently. The following is a technical reference on the part's specifications and on the considerations that govern its selection.
The ZF 0501328035 filter element is designed for a defined set of hydraulic filtration applications. When specifying the part, users are advised to focus on its physical attributes and on compatibility with the host system rather than on generic filtration claims.
The element is a precision filtration component built to ZF's manufacturing standards, an approach intended to sustain stable filtration efficiency under demanding hydraulic operating conditions. Its identifying data are summarized below.
| Parameter | Specification or description |
|---|---|
| Reference number (REF. NO.) | 0501328035 |
| SKU / HAN | Z-0501328035 / 0501328035 |
| Shipping weight | 0.249 kg |
| Net product weight | 0.242 kg |
Procurement of this class of spare part requires a clear distinction between original components and equivalent alternatives. Parts supplied through official ZF channels are engineered to meet the pressure and flow requirements of specific equipment.
Fitting a non-standard or mismatched element can produce abnormal pressure within the hydraulic system and may accelerate wear on internal precision components. Before replacing a filter element, users should verify the model number on the equipment nameplate and confirm that the element's stated application range covers the machine in question.
The element is classified as a special-order item and generally falls outside standard return and exchange policies. Confirming the accuracy of the part number before an order is placed is therefore essential. Where questions remain about installation procedure or compatibility, the technical documentation issued through ZF's official after-sales channels is the appropriate reference.
Installation practice materially affects filtration performance. The hydraulic system should be fully depressurized before any element is removed, and the area around the filter housing should be cleaned to prevent contaminants from entering the hydraulic circuit.
After the new element is seated, a short low-pressure test run is recommended to check for leakage at the housing and connections. Any seepage observed at this stage should be resolved before the equipment returns to normal service.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski